Asphalt Sealcoating Tips for the Hot Southern Utah Summer
Southern Utah asphalt sealcoating can bring your pavement back to life, all while providing years of protection against weathering and wear. The best asphalt sealcoating professionals use premium products that offer impressive coverage, restoring the deep color and rich finish of fresh paving. Summer is a fantastic time to hire sealcoating companies, but there are a few challenges they need to overcome to get the best results. Read on to learn vital asphalt sealcoating tips that can ensure beautiful, long-lasting outcomes this summer.
What Should I Do Before Proceeding with Sealcoating in St George?
Before sealcoating in Southern Utah, your pavement likely needs some additional attention. Sealcoating should be one of the last services you get. It's that final polish that protects your pavement moving forward, but it won't magically fix existing damage.
The best sealcoating companies will thoroughly inspect your paved surfaces. They'll look for early signs of damage and note any issues you must address before they can apply the sealer. Invest in comprehensive repairs. Fill and seal cracks, patch potholes, correct surface damage, and handle any other repair work that your pavement needs.
Doing so will create a smooth, reliable surface that's ready for sealcoating in St George.
What Asphalt Sealcoating Tips Encourage Longevity?
Regardless of repair work, reputable sealcoating companies will always take time to prepare your pavement for application. Sealers need a clean, dry surface to bond to. The cleaner and more thoroughly prepared your asphalt is, the longer the sealer will last.
Sealcoating companies recommend service every three to five years, and good surface prep can help you get the most bang for your buck. Before a project begins, consider sweeping away dirt, picking up trash, and cleaning up any surrounding grass or vegetation. The best sealcoating companies can take things further, pretreating stains to improve bonding. If necessary, they may even wash your blacktop surfaces to eliminate built-up grime.
Once the pavement is dry, it's ready for sealing.
Are There Any Asphalt Sealcoating Tips Experts Use to Beat the Heat?
Summer is the perfect time for Southern Utah asphalt sealcoating because the weather is warm and conditions are more stable. However, summers in St. George can reach over 100 degrees Fahrenheit! Most sealers can't handle that.
In extreme heat, sealcoating in Southern Utah can flash-cure. When that happens, the moisture content in the sealer will evaporate before the protective bitumen has a chance to seep into pores and cracks. In many cases, the water will evaporate instantly, curing the sealer far too fast to form a tight bond. The result is poor protection and longevity.
Fortunately, the best sealcoating companies can use the following strategies to cool your pavement and ensure better results in the summer.
• Fogging: Misting asphalt is an effective way to cool it. On those hotter days, the water will evaporate quickly, resulting in a fog-like effect. More importantly, it brings the asphalt temperature down to a more acceptable range while drying it out in minutes.
• Diluted Primer: Some contractors will create a diluted sealer mix and use it as a primer. When asphalt sealcoating, the first layer cools the pavement and prepares it for a standard coat of sealer.
• Additional Coats: If flash curing happens, contractors can add additional coats. The first is more of a sacrificial primer that helps cool the surface. Additional layers provide coverage and protection.
What Can I Do to Maintain the Best Asphalt Sealcoating Results?
After sealcoating in St George, your priority should be ongoing maintenance. No sealer lasts forever, but there's plenty you can do to maintain the finish and extend its longevity.
Cleaning has the biggest impact. Accumulated grime will wear down the sealer and put your pavement at risk of premature oxidation. Get into the habit of picking up trash and spills. Have teams sweep the surface regularly and wash your asphalt with a mild detergent every few months to limit buildup.
Let Prime Pave handle all your Southern Utah asphalt sealcoating needs. We have years of proven expertise and pride ourselves on our customer-first approach. We work closely with you from start to finish, offering full accountability, transparency, and unmatched quality. That applies to all our services, including sealcoating, crack filling, perimeter sealing, pothole repair, line striping, cleaning, stenciling, paving, and more.
Get your free, no-obligation quote for sealcoating in Southern Utah today by calling Prime Pave at (435) 900-2884 . If you prefer, you can also submit our online form or email our team at Service@PrimePaveLLC.Com.
